Betaflight presets in your browser

A preset is a list of CLI commands, and applying one changes settings on your board. Take a backup first: FlySpark offers one before you apply, and the CLI page explains how backups and restores work. Read the preset's description and warnings, and check that it is meant for your frame, motors and firmware version.

Tuning presets are written for a particular setup. A tune for a 5-inch freestyle quad will not suit a 3-inch cinewhoop, even if both fly Betaflight.

VTX table presets fill in the bands, channels and power levels for a video transmitter in one step. Receiver presets set up ExpressLRS, Crossfire or other links. Rate presets copy the stick feel of well-known pilots, and filter and PID presets give a starting tune for popular frames. You can apply several together, for example a VTX table and a rate preset, and save once.

After applying, check the result in the matching tab of the Betaflight configurator, and use the rates page if you want to adjust the feel further.

Presets are collected in the official Betaflight presets repository, maintained by the Betaflight community. FlySpark reads that repository directly and shows the presets that match your firmware. If a team or a shop publishes its own presets, you can add their repository as an extra source.